PNI: PlacePod™ In-Ground Model

PNI: PlacePod™ In-Ground Model 150 150 ResIOT®

PNI: PlacePod™ In-Ground Model

Description

PlacePod solves the most mission-critical aspects of parking management: accurate, real-time vehicle detection and location of available parking spaces.
PlacePod is an in-ground or surface-mounted smart parking sensor that communicates with a LoRa gateway or Sigfox base station to provide real-time parking data.
It provides accurate vehicle detection in parking spaces, up to 10 years of battery life, and is stable over temperature fluctuations, even in harsh environments.

The radio transmission is based on the new disruptive LoRaTM long range technology at 868MHz and 915MHz.

 

 Technical Features

 
ManufacturerPNI Sensor Corporation
Manufacturer CodePlacePod
FrequencyEU863-870, US902-928MHz
ModulationLoRaWAN™ compliant + Sigfox module
Power SupplyBattery with 10 years life time
Dimension4.3 in (10.92 cm) diameter
-minimum hole 4.5 in (11.43 cm)
1.18 in (3.00 cm) height
-minimum hole 2.5 in (6.35cm)
Storage Temperature-40°C to +85°C
-40°F to +185°F
Operating Temperature-30°C to +70°C
-22°F to +158°F

ResIOT Fully Preconfigured Model Uplink/Downlink

 
Node FieldsCommands
Latitude Recalibrate
Longitude Force_To_Occupied
Altitude Force_To_Vacant
Timeout_State Request_Self_Test
Status Enable_Intermediate_Report
ConfidenceLevel Disable_Intermediate_Report
LsMode Set_WakeUp_Intervall
Temperature Enable_Car_Detector_Data_Mode
BatteryStatus Disable_Car_Detector_Data_Mode
MagnetometerX Ping
MagnetometerY Set_WakeUp_Intervall_Temp
MagnetometerZ Set_Radio_TX_Power
NumberCars Soft_Reset
NumberPreviousCars
MultiCarFlag
CarDetectorMode
CarDetectorDataMode
ContinuousMode
IntermediateStateReport
WakeUpIntervall
RSSI
SNR
HostMajorVersion
HostMinorVersion
HostPatchVersion
HostBuildNumber
SensorMajorVersion
SensorMinorVersion
SensorPatchVersion
SensorBuildNumber
BLEMajorVersion
BLEMinorVersion
BLEPatchVersion
BLEBuildNumber
RadioMajorVersion
RadioMinorVersion
RadioPatchVersion
RadioBuildNumber
TimeSinceBoot
CalibrationComplete
Back to top